1. Super strong adhesion, greatly improving the adhesion between tile stone and wall;
2. Strong permeability, quickly permeating the base course and solidifying into a permanent bonding course;
3. Good flexibility, preventing hollowing and falling off caused by bottom shrinkage;
4. Convenient use for construction, greatly saving the unit cost;
5. Resistant to strong acids and alkalis, preventing surface efflorescence;
6. Good freeze-thaw resistance and excellent aging resistance.
It is suitable for strengthening the back primer coat when fixing glazed tiles, through-body tiles, polished tiles, vitrified tiles, anti-skid tiles, imitation tiles, marble, granite, slabstone and other tiles with low water absorption rate in the indoor living room, kitchen and bathroom, balcony and other places.
Step One: Remove oil stains, dust and other sundries on the back of the tile;
Step Two: Apply the tile backing adhesive and apply the tile adhesive in batches;
Step Three: Bond tiles on walls or floors.
✔ The back of the tile or the wall must be firm and solid, dry and clean, and free of dust and other debris; loose base surfaces and protruding objects shall be removed first;
✔ Do not add any material to the tile backing adhesive; application or spraying shall be uniform without missing or falling; the environment temperature during construction should be 10-40 ℃;
✔ The next process can only be carried out after the backing adhesive is transparent from the white side after application;
✔ The backing adhesive on the front of the tile shall be wiped off immediately with a rag.