CN-
Product parameter
Product specification: 20kg/bag
Ratio: mix water and powder in a ratio of about 1:0.22
Executive standard: JC/T 985-2017 Cementitious Self-leveling Floor Mortar
-
Serviceable range
The product can be used for light-load indoor floor leveling in homes, offices, villas, etc., and decoration layers such as floors, tiles and carpets can continue to be fixed in the future.
-
Construction process
Step One: “Base surface treatment”
Newly poured concrete needs to be cured for longer than 28d;
The concrete strength on the base surface shall be above C20, and the water content shall be less than 10%. The laitance, oil stains, pollutants, etc. on the surface shall be removed and the defective parts shall be repaired;
After the base course is treated, use a special interface agent to seal the base course.
Step Two:“Self-leveling and mixing”
Pour clean water into the mixing bucket (the weight ratio of powder to water is 1:0.22, and the packaging is 20kg/bag, that is, 4.4kg of water is added to each bag);
Add powder while mixing, and mix for 3-5 minutes until the material is uniform without lumps. Let it stand for 2-3 minutes before spreading it. Note: The mixed material needs to be used up within 20 minutes (in areas with high temperatures and abundant sunlight, it needs to be used up in a shorter period of time).
Step Three:“Applying the mixed adhesive”
According to the thickness requirements during construction, adjust the teeth length of the special scraper for self-leveling for spreading;
Timely use the defoaming roller for cross defoaming.
-
Notes
✔ Please confirm that personal protective equipment (PPE) is worn before using the product.
✔ Before construction, it must be confirmed that the base surface treatment meets the construction requirements.
✔ The mixed self-leveling product shall be used up within the specified time. Do not mix the dried slurry with water again
✔ Pay attention to the treatment at the overlapping joints during construction. Do not proceed to the next step of construction before the product is completely dry.
✔ The construction thickness is 1-6mm.